SN10 Mechanical Dimensions

ILEC Australia

SN10 & Accessories Physical Dimensions

The mechanical dimensions of the SN10 and its options are:

SN10 (main unit)
fits in a 80 mm (3 1/8 inch) standard cut-out;
the dimensions are:  85 x 89 x 160 mm  ( width x height x depth );
in addition to the 160 mm depth of the main unit you will need 45 mm for the electric and pneumatic hook ups at the rear (lower half) of the instrument;

SN10-2 (two seater repeater)
fits in a 80 mm (3 1/8 inch) standard cut-out;
the dimensions are: 85 x 89 x 85 mm  ( width x height x depth );
in addition to the 85 mm depth of the two seater repeater you will need 45 mm for the electric hook ups at the rear (lower half) of the instrument;

RAZ (external meter)
fits in a 57 mm (2 ¼ inch) standard cut-out;
the dimensions are: 62 x 62 x 50 mm  ( width x height x depth );

Front Panel Cable Connector
the adapter cable may be installed anywhere in the front panel;
size: 32 (53 for mounting) x 15 mm , depth 40 mm;

Copyright © 2020 - Dion Weston Associates, Dave Nadler, ILEC GmbH - All Rights Reserved
Site maintained by Dion Weston Associates, agents for ILEC in Australia & New Zealand.
Page updated: 08/07/2020